Mercedes-Benz compatible SEALS O-ring rebuild kit for ABC hydraulic suspension valve block W220 C215 R230
Mercedes-Benz compatible SEALS O-ring rebuild kit for Mercedes-Benz ABC hydraulic suspension valve block Mercedes-Benz S-Class W220 + AMG (1998-2005) , Mercedes-Benz CL-Class C215 + AMG (1998-2006) , Mercedes-Benz SL Class R230 + AMG (2001-2011)
- Complete O-ring rebuild kit to rebuild all valves on ONE ABC valve block. (FRONT OR REAR)
New
Mercedes-Benz compatible SEALS O-ring rebuild kit for Mercedes-Benz ABC hydraulic suspension valve block W220 C215 R230 A2203280031 A2203200358 A2203201258
(Active Body Control valve block repair kit)
- Complete rebuild kit to rebuild all valves on one ABC valve block.(FRONT OR REAR)
- Suitable for both FRONT or REAR valve block.
- If you want rebuild FRONT+ REAR valve block on car, you need TWO SETS.
- ONE REBUILD KIT = ONE REBUILD VALVE BLOCK.
Compatible with these ABC valve blocks:
- A2203280031
- A2203200358
- A2203201258
- A2203200031
- A2203201258
Found in:
- Mercedes-Benz S-Class (W220) + AMG (1998-2005)
- Mercedes-Benz CL-Class (C215) + AMG (1998-2006)
- Mercedes-Benz SL Class (R230) + AMG (2001-2011)
Include:
- 6x Marked O-ring for left front main control valve (include exchange for flat bottom valve block seal)
- 6x Marked O-ring for right front main control valve (include exchange for flat bottom valve block seal)
- 3x Marked O-ring for left front shut-off valve
- 3x Marked O-ring for right front shut-off valve
- 20x Color coding stickers to label al parts position (quality adhesive and colour stable, resistant to oils)
- 2x Color coded zip bag for shut off valve plunger
- 1x Razor blade for removing old O-rings
- 1x Brush to clean valves
- 1x Pair of nitrile gloves
- 1x Main drawing of complete valve block explaining all parts and hydraulic line position and colours.
- 2x Drawing of main and shut-off valve with marked O rings position.
- 4x Info and drawing about front and rear valve block unit.
- 1x instruction step by step how to rebuild valve block.
The valve block seal kit was developed by specialist in car hydraulic systems with many years of experience. The seal kits has been used and working fine for over 3 year now.
The original seals are problematic, so the solution is not replacement of original o rings, but new size, material and hardness of each o-rings depend on measurements of valves, valve block boring and presented hydraulic pressure.
They seal better like original and will last long time.
Abbes-Performance.com info@abbes-performance.com
Abbes-Performance.com 2016
Accessories
Related product
